Mld Timer Query; Mld Version - H3C MSR 20-20 Command Reference Manual

mld timer query

Syntax
View
Parameter
Description
Related command:
Example

mld version

Syntax
View
Parameter
Description
Related command:
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mld timer other-querier-present 200
mld timer query interval
undo mld timer query
Interface view
interval: query interval, namely the amount of time in seconds between MLD
general queries, in the range of 1 to 18,000.
Use the
mld timer query
current interface.
Use the
undo mld timer query
By default, the query interval is 125 seconds.
mld timer query, mld timer other-querier-present, and display mld
interface.
# Set the query interval to 200 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mld timer query 200
mld version version-number
undo mld version
Interface view
version-number: MLD version, 1 or 2.
Use the mld version command to configure the MLD version on the current
interface.
Use the
undo mld version
By default, the MLD version is MLDv1.
mld version.
command to configure the query interval on the
command to restore the default configuration.
command to restore the default MLD version.
1455