Display Rip Database - H3C MSR 20-20 Command Reference Manual

1164 C 77: RIP C
HAPTER

display rip database

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
Table 278 Description on the fields of the display rip command
Field
Timeout time
Suppress time
Garbage-collect time
TRIP retransmit time
TRIP response packets retransmit
count
Silent interfaces
Default routes
Verify-source
Networks
Configured peers
Triggered updates sent
Number of routes changes
Number of replies to queries
display rip process-id database
Any view
process-id: RIP process number, in the range of 1 to 65535.
Use the display rip database
database, which are sent in normal RIP routing updates.
# Display the active routes in the database of RIP process 100.
<Sysname> display rip 100 database
10.0.0.0/8, cost 1, ClassfulSumm
10.0.0.0/24, cost 1, nexthop 10.0.0.1, Rip-interface
11.0.0.0/8, cost 1, ClassfulSumm
11.0.0.0/24, cost 1, nexthop 10.0.0.1, Imported
Table 279 Description on fields of the display rip database command
Field
X.X.X.X/X
cost
classful-summ
Nexthop
Rip-interface
imported
Description
RIP timeout time
RIP suppress interval
RIP garbage collection interval
TRIP retransmit interval for sending update requests and
responses
Maximum retransmit times for update requests and
responses
Number of silent interfaces, which do not periodically
send updates
Indicates whether a default route is sent to RIP neighbors
Indicates whether the source IP address is checked on the
received RIP routing updates
Networks enabled with RIP
Configured neighbors
Number of sent triggered updates
Number of changed routes in the database
Number of RIP responses
command to display the active routes in the RIP
Description
Destination address and subnet mask
Cost of the route
Indicates the route is a RIP summary route.
Address of the next hop
Routes learnt from a RIP-enabled interface
Routes redistributed from other routing protocols