Dampening (Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

1224 C 82: IP 6 BGP C
HAPTER V

dampening (IPv6 address family view)

Syntax
View
Parameters
Description
Related commands:
Examples
C
ONFIGURATION OMMANDS
dampening [ half-life-reachable half-life-unreachable reuse suppress ceiling |
route-policy route-policy-name ] *
undo dampening
IPv6 address family view
half-life-reachable: Specifies the half-life for active routes, in the range 1 to 45
minutes. By default, the value is 15 minutes.
half-life-unreachable: Specifies the half-life for active routes, in the range 1 to 45
minutes. By default, the value is 15 minutes.
reuse: Specifies the reuse threshold value for suppressed routes, in the range 1 to
20000. Penalty value of a suppressed route decreasing under the value is reused.
By default, its value is 750.
suppress: Specifies a suppression threshold from 1 to 20000, which should be
bigger than the reuse value. Routes with a penalty value bigger than the threshold
are suppressed. By default, it is 2000.
ceiling: Specifies a ceiling penalty value from 1001 to 20000. The value must be
bigger than the suppress value. By default, the value is 16000.
route-policy-name: Routing policy name, a string of 1 to 19 characters.
half-life-reachable, half-life-unreachable, reuse, suppress and ceiling are mutually
dependent. Once any one is configured, all the others should also be specified
accordingly.
Use the
dampening
configure dampening parameters.
Use the undo dampening
By default, no route dampening is configured.
reset bgp ipv6 dampening, reset bgp ipv6 flap-info, display bgp ipv6
routing-table dampened, display bgp ipv6 routing-table dampening
parameter and display bgp ipv6 routing-table flap-info.
# Enable IPv6 BGP route dampening and configure route dampening parameters.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] dampening 10 10 1000 2000 3000
command to enable IPv6 BGP route dampening or/and
command to disable route dampening.