Display Mpls Interface - H3C MSR 20-20 Command Reference Manual

display mpls interface

Syntax
View
Parameter
Description
Related command:
Example
1024 S2/0
1 Record(s) Found
Table 367 Description on the fields of the display mpls ilm command
Field
Inlabel
In-Interface
Token
VRF-Index
Oper
LSP-Type
Swap-Label
display mpls interface [ interface-type interface-number ] [ verbose ]
Any view
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
Use the display mpls interface
specified or all interfaces with MPLS enabled.
display mpls statistics interface.
# Display information about all interfaces with MPLS enabled.
<Sysname> display mpls interface
Interface Status
Eth1/0 Up
Eth1/1 Up
# Display detailed information about MPLS-enabled interface Ethernet 1/0.
<Sysname> display mpls interface ethernet 1/0 verbose
No : 1
Interface : Eth1/0
Status : Down
TE Attribute : Disable
LSPCount : 0
CR-LSPCount : 0
FRR : Disabled
Table 368 Description on the fields of the display mpls interface command
Field
No
Interface
2 0
Description
Incoming label
Incoming interface
NHLFE entry index
VRF index
Operation type
LSP type
Label for swapping
command to display information about a
TE Attr LSP Count
En 0
En 0
Description
Sequence number
Name of the interface
POP NORMAL ----
CRLSP Count
0
0
1515