L2Tp Enable; L2Tp Sendaccm Enable - H3C MSR 20-20 Command Reference Manual

1760 C 104: L2TP C
HAPTER
Related command:
Example

l2tp enable

Syntax
View
Parameter
Description
Related command:
Example

l2tp sendaccm enable

Syntax
View
Parameter
Description
C
ONFIGURATION OMMANDS
A virtual interface template is intended to provide parameters for virtual interfaces
to be dynamically created by the router, such as logical MP interfaces and logical
L2TP interfaces.
allow l2tp.
# Create virtual interface template 1 and enter virtual interface template view.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1]
l2tp enable
undo l2tp enable
System view
None
Use the
l2tp enable
Use the undo l2tp enable
By default, the L2TP function is disabled.
You must enable L2TP before performing L2TP configurations.
l2tp-group.
# Enable the L2TP function.
<Sysname> system-view
[Sysname] l2tp enable
l2tp sendaccm enable
undo l2tp sendaccm enable
System view
None
Use the l2tp sendaccm enable
control messages.
command to enable the L2TP function.
command to disable the L2TP function.
command to enable an LNS to include ACCM in