Display Ospfv3 Next-Hop; Display Ospfv3 Peer - H3C MSR 20-20 Command Reference Manual

display ospfv3 next-hop

Syntax
View
Parameters
Description
Examples

display ospfv3 peer

Syntax
View
Parameters
Description
display ospfv3 [ process-id ] next-hop
Any view
process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
Use the display ospfv3 next-hop
information.
If no process is specified, next hop information of all OSPFv3 processes is
displayed.
# Display OSPFv3 next hop information.
<Sysname> display ospfv3 next-hop
OSPFv3 Router with ID (2.2.2.2) (Process 1)
Neighbor-Id Next-Hop
1.1.1.1 FE80::20F:E2FF:FE00:1
Table 303 Description on the fields of the display ospfv3 next-hop command
Field
Neighbor-Id
Next-hop
Interface
RefCount
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ]
[ verbose ] | peer-router-id ]
Any view
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
area: Specifies to display neighbor information of the specified area.
area-id: The ID of an area, a decimal integer that is translated into IPv4 address
format by the system (in the range of 0 to 4294967295) or an IPv4 address.
interface-type interface-number: interface type and number.
verbose: Display detailed neighbor information.
peer-router-id: Router-ID of the specified neighbor.
Use the
display ospfv3 peer
command to display OSPFv3 next hop
Description
Neighboring router ID
Next-hop address
Outbound interface
Reference count
command to display OSPFv3 neighbor information.
1287
Interface RefCount
Eth1/0 1