Peer Description; Peer Mesh-Group - H3C MSR 20-20 Command Reference Manual

1374 C 89: MSDP C
HAPTER
Related command:
Example

peer description

Syntax
View
Parameter
Description
Related command:
Example

peer mesh-group

Syntax
C
ONFIGURATION OMMANDS
Use the undo peer connect-interface
connection.
No MSDP peer connection is created by default.
Be sure to carry out this command before you use any other peer command;
otherwise the system will prompt that the peer does not exist.
static-rpf-peer.
# Configure the router with the IP address of 125.10.7.6 in the public instance as
the MSDP peer of the local router, with interface Ethernet 1/0 as the local
connection port.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface ethernet 1/0
peer peer-address description text
undo peer peer-address description
Public instance MSDP view, VPN instance MSDP view
peer-address: MSDP peer address.
text: Descriptive text, a string of 1 to 80 characters (case sensitive).
Use the peer description
the specified MSDP peer.
Use the
undo peer description
information of the specified MSDP peer.
By default, an MSDP peer has no description information.
display msdp peer-status.
# In the public instance, add the descriptive text "Router CstmrA" for the router
with the IP address of 125.10.7.6 to indicate that this router is Customer A.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description Router CstmrA
peer peer-address mesh-group name
command to remove an MSDP peer
command to configure the description information for
command to delete the configured description