Refresh Bgp; Reset Bgp - H3C MSR 20-20 Command Reference Manual

1008 C 72: BGP C
HAPTER

refresh bgp

Syntax
View
Parameters
Description
Examples

reset bgp

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] reflector cluster-id 80
refresh bgp { all | ip-address | group group-name | external | internal } { export |
import }
User view
all: Soft-resets all BGP connections.
ip-address: Soft-resets the BGP connection to a peer.
group-name: Soft-resets connections to a peer group, name of which is a sting of
1 to 47 characters.
external: EBGP connection.
internal: IBGP connection.
export: Outbound soft reset.
import: Inbound soft reset.
Use the
refresh bgp
connections. Using this function can refresh the BGP routing table without tearing
down BGP connections and apply a newly configured routing policy.
To perform BGP soft reset, all routers in the network must support route-refresh. If
a router not supporting route-refresh exists in the network, you need to configure
the peer keep-all-routes command to save all routing updates before
performing soft reset.
# Perform inbound BGP soft reset.
<Sysname> refresh bgp all import
reset bgp { all | as-number | ip-address [ flap-info ] | group group-name | external |
internal }
User view
all: Resets all BGP connections.
as-number: Resets BGP connections to peers in the AS.
command to perform soft reset on specified BGP