Idle-Timeout - H3C MSR 20-20 Command Reference Manual

View
Parameters
Description
Example

idle-timeout

Syntax
View
Parameters
Description
Example
undo driverbuf size
Terminal template view
number: Buffer size, in kilobytes (KB), ranging from 8 to 32.
Use the
driverbuf size
Use the
undo driverbuf size
By default, the size of terminal receiver buffer is 8 KB.
Note that this command takes effect only after the template is reapplied on the
interface.
# Set the terminal buffer size to 8 KB.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] driverbuf size 8
idle-timeout seconds
undo idle-timeout
Terminal template view
seconds: Connection idle timeout time, in seconds, ranging 10 to 3,600.
Use the idle-timeout
terminal access.
Use the
undo idle-timeout
By default, the terminal access idle timeout time is 0 seconds; that is, the TCP
connection never times out.
With the idle timeout time configured, if no data is transmitted over the terminal
access connection in the specified period of time, the connection is automatically
torn down.
# Set the terminal access idle timeout time to 1,000 seconds.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] idle-timeout 1000
command to configure the size of terminal receive buffer.
command to restore the default setting.
command to set the TCP connection idle timeout time for
command to restore the default.
907