Register-Suppression-Timeout (Pim View); Register-Policy (Pim View) - H3C MSR 20-20 Command Reference Manual

1420 C 90: PIM C
HAPTER
Description
Related command:
Example

register-policy (PIM view)

Syntax
View
Parameter
Description
Related command:
Example

register-suppression-timeout (PIM view)

Syntax
C
ONFIGURATION OMMANDS
Use the probe-interval
Use the
undo probe-interval
By default, the register probe time is 5 seconds.
register-suppression-timeout (PIM view).
# Set the probe time to 6 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] probe-interval 6
register-policy acl-number
undo register-policy
Public instance PIM view, VPN instance PIM view
acl-number: Advanced ACL number, in the range of 3000 to 3999. Only register
messages that match the permit statement of the ACL can be accepted by the RP.
Use the
register-policy
messages.
Use the undo register-policy
filtering rule.
By default, no register filtering rule is configured.
register-suppression-timeout (PIM view).
# In the public instance configure the RP to accept only those register messages
for multicast traffic from multicast sources in the range of 10.10.0.0/16 to
multicast groups in the range of 225.1.0.0/16.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule permit ip source 10.10.0.0 0.0.255.255 d
estination 225.1.0.0 0.0.255.255
[Sysname-acl-adv-3000] quit
[Sysname] pim
[Sysname-pim] register-policy 3000
register-suppression-timeout interval
command to configure the register probe time.
command to restore the default setting.
command to configure an ACL rule to filter register
command to remove the configured register