Display Ospf Interface - H3C MSR 20-20 Command Reference Manual

1120 C 76: OSPF C
HAPTER

display ospf interface

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
Table 266 Description on the fields of the display ospf error command
Field
LS ACK: Unknown LSA type
LS REQ: Empty request
LS REQ: Bad request
LS UPD: LSA checksum bad
LS UPD: Received less recent LSA
LS UPD: Unknown LSA type
display ospf [ process-id ] interface [ all | interface-type interface-number ]
Any view
process-id: OSPF process ID, in the range 1 to 65535.
all: Display OSPF information of all interfaces.
interface-type interface-number: Interface type and interface number.
Use the display ospf interface
If no OSPF process is specified, OSPF interface information of all OSPF processes is
displayed.
# Display OSPF interface information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Area: 0.0.0.0
IP Address
192.168.1.1
Area: 0.0.0.1
IP Address
172.16.0.1
Table 267 Description on the fields of the display ospf interface command
Field Description
Area Area ID of the interface
IP address Interface IP address (regardless of whether TE is enabled or not)
Type Interface network type: PTP, PTMP, Broadcast, or NBMA
State Interface state defined by interface state machine: DOWN, Waiting, p-2-p,
DR, BDR, or DROther
Cost Interface cost
Pri Router priority
Description
LSAck packets with unknown LSA type
LSR packets with no request information
Bad LSR packets
LSU packets with wrong LSA checksum
LSU packets without latest LSA
LSU packets with unknown LSA type
command to display OSPF interface information.
Interfaces
Type State
PTP P-2-P
Type State
Broadcast DR
Cost Pri DR
1562 1 0.0.0.0
Cost Pri DR
1 1 172.16.0.1
BDR
0.0.0.0
BDR
0.0.0.0