H3C MSR 20-20 Command Reference Manual page 1091

Table 243 Description on the fields of the debugging isis adjacency command
Field
Rxed helloType Hello on circuitName, from
SNPA SNPA
Sending helloType Hello on circuitName
Running DIS Election, circuitName
Declaring as DIS,DIS Type type,on
circuitName, Old DIS (net1), New DIS net2
Send Failure
Update DIS Down Processing Failure
Circuit State change reported for Unknown
Circuit Type
Adjacency(s) Not deleted On circuit Down
Rxed P2P IIH on circuitName.IIH Rejected
Wrong Circ Type(circuitType)
helloType IIH request reserved circuit type.
Ignored
Rxed helloType IIH with duplicate Local System
ID. IIH Discarded
helloType IIH Authentication Failure. IIH
Discarded
Rxed helloType IIH has Invalid IP address.IIH
Ignored
Rxed helloType IIH contains No usable Ip
Address. IIH Discarded
Description
IS-IS received a hello packet.
helloType: Hello packet type: Lan L1, Lan L2,
or P2P.
circuitName: Interface name
SNPA: Source MAC address of the packet.
IS-IS is sending a hello packet.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
circuitName: Interface name
IS-IS is running a DIS election.
circuitName: Interface name
IS-IS is declaring the new DIS.
type: L1 or L2.
net1: Net entity title of the old DIS.
net2: Net entity title of the new DIS.
Sending a hello packet failed.
Processing the DIS Down event failed.
Interface type change error due to unknown
interface type
Adjacency deletion failed after the interface
was down.
The received hello packet was rejected
because the interface type (point-to-point) is
wrong.
circuitName: Interface name
circuitType: Interface type, which can be L1,
L2, or L12.
IS-IS received an IIH packet with interface type
as reserved and therefore ignored it.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
The received hello packet was not processed
due to a duplicate system ID.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
The received hello packet was discarded due
to an authentication failure.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
IP address is invalid; therefore, the received
hello packet was not processed.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
The received hello packet was discarded
because it contains no usable IP address.
helloType: Hello packet type: LAN L1, LAN L2,
or P2P.
1091