Peer Capability-Advertise Route-Refresh - H3C MSR 20-20 Command Reference Manual

988 C 72: BGP C
HAPTER
Description
Examples

peer capability-advertise route-refresh

Syntax
View
Parameters
Description
Examples
C
ONFIGURATION OMMANDS
Use the peer capability-advertise conventional
multi-protocol extension and route refresh for a peer/peer group.
Use the
undo peer capability-advertise
multi-protocol extension and route refresh for a peer/peer group.
By default, BGP multi-protocol extension and route refresh are enabled.
# In BGP view, disable multi-protocol extension and route refresh for peer
160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise conventional
peer { group-name | ip-address } capability-advertise route-refresh
undo peer { group-name | ip-address } capability-advertise route-refresh
BGP view/BGP-VPN instance view
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Use the peer capability-advertise route-refresh
route refresh capability.
Use the
undo peer capability-advertise route-refresh
the capability.
The capability is enabled by default.
# In BGP view, enable BGP route refresh for peer 160.89.2.33.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 160.89.2.33 as-number 100
[Sysname-bgp] peer 160.89.2.33 capability-advertise route-refresh
# In BGP-VPN instance view, enable BGP route refresh for peer 160.89.2.33 (The
VPN has been created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer 160.89.2.33 as-number 100
[Sysname-bgp-vpn1] peer 160.89.2.33 capability-advertise route-refresh
command to disable BGP
command to enable BGP
command to enable the BGP
command to disable