H3C MSR 20-20 Command Reference Manual page 1649

Example # Display all information about L2VPN in the BGP routing table.
<Sysname> display bgp l2vpn all
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
Route Distinguisher: 100:1
CE ID Label Offset
1 0
Table 421 Description on the fields of the display bgp l2vpn all command
Field
BGP Local router ID
Local AS number
Origin codes
bgp l2vpn
Route Distinguisher
CE ID
Label Offset
Label Base
nexthop
pref
as-path
# Display brief information about L2VPN peers in the BGP routing table.
<Sysname> display bgp l2vpn peer
BGP local router ID : 4.4.4.9
Local AS number : 100
Total number of peers : 1
Peer
3.3.3.9
Table 422 Description on the fields of the display bgp l2vpn peer command
Field
BGP local router ID
Local AS number
Total number of peers
Peers in established state
Peer
V
AS
MsgRcvd
Label Base
8202
Description
BGP local router ID
Local AS number
Route origin codes, which can be:
i - IGP: Indicates that the network layer reachability information is
from within the AS
e - EGP: Indicates that the network layer reachability information is
learned through EGP
? - incomplete: Indicates that the network layer reachability
information is learned through other ways
Number of BGP L2VPNs
RD
CE number in the VPN
Label offset
Label base
IP address of the next hop
Local preference
AS-PATH of the route
V AS MsgRcvd MsgSent
4 100 20 22
Description
ID of the local BGP router
Local AS number
Number of peers
Number of peers with BGP sessions in the state of
established
IP address of the peer
BGP version that the peer is using
AS number
Number of messages received
nexthop pref
3.3.3.9 100
Peers in established state : 0
OutQ PrefRcv Up/Down
0 00:15:30 Established
1649
as-path
State PrefRcv
0