Display Ospf Asbr-Summary - H3C MSR 20-20 Command Reference Manual

1114 C 76: OSPF C
HAPTER
Parameters
Description
Examples

display ospf asbr-summary

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
process-id: OSPF process ID, in the range 1 to 65535.
Use the display ospf abr-asbr
ABR/ASBR.
If no process is specified, ABR/ASBR information of all OSPF processes is displayed.
If you use this command on routers in a stub area, no ASBR information is
displayed.
# Display information about ABR/ASBR.
<Sysname> display ospf abr-asbr
OSPF Process 1 with Router ID 192.168.1.2
Type Destination
Inter 3.3.3.3
Intra 2.2.2.2
Table 262 Description on the fields of the display ospf abr-asbr command
Field
Type
Destination
Area
Cost
Nexthop
RtType
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ]
Any view
process-id: OSPF process ID, in the range 1 to 65535.
ip-address: Matched IP address, in dotted decimal format.
mask: IP address mask, in dotted decimal format.
mask-length: Mask length, in the range 0 to 32 bits.
Use the
display ospf asbr-summary
the redistributed routes that are summarized.
If no OSPF process is specified, related information of all OSPF processes is
displayed.
If no IP address is specified, information about all summarized redistributed routes
will be displayed.
command to display information about
Routing Table to ABR and ASBR
Area
0.0.0.0
0.0.0.0
Description
Intra-area router or Inter-area router
Router ID of an ABR/ASBR
ID of the area of the next hop
Cost from the router to the ABR/ASBR
Next hop address
Router type: ABR, ASBR
command to display information about
Cost Nexthop
3124 10.1.1.2
1562 10.1.1.2
RtType
ASBR
ABR