Debugging Bgp Update Vpnv4 - H3C MSR 20-20 Command Reference Manual

Examples

debugging bgp update vpnv4

Syntax
View
Default Level
Parameters
Description
Examples
Refer to "debugging bgp update vpnv4" on page 1035 for the description of the
update message information.
None
debugging bgp update vpnv4 [ peer { ipv4-address | group-name } ] [ receive | send ]
[ verbose ]
undo debugging bgp update vpnv4 [ peer { ipv4-address | group-name } ] [ receive |
send ] [ verbose ]
User view
1: Monitor level
peer { ipv4-address | group-name }: Enables/disables BGP Update message
debugging for the specified peer/peer group.
receive: Enables/disables the debugging for the received BGP VPNv4 packets.
send: Enables/disables the debugging for the sent BGP VPNv4 packets.
verbose: Displays detailed debugging information.
Use the
debugging bgp update vpnv4
BGP VPNv4 Update messages.
Use the undo debugging bgp update vpnv4
for BGP VPNv4 Update messages.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
# Device A and Device B have established a BGP peer relationship under the VPNv4
instance. On Device A, enable debugging for received BGP VPNv4 update
messages; on Device B, enable debugging for sent BGP VPNv4 update messages.
<Sysname> debugging bgp update vpnv4
%Sep 4 16:14:32:00 2006 Sysname RM/3/RMLOG:
BGP.: 2.2.2.2 State is changed from OPENCONFIRM to ESTABLISHED.
*Sep 4 16:14:32:16 2006 Sysname RM/6/RMDEBUG:
BGP_L3VPN.: Send UPDATE to peer 2.2.2.2 for following destinations :
*Sep 4 16:14:32:16 2006 Sysname RM/6/RMDEBUG:
Origin : Incomplete
AS Path :
Next Hop : 1.1.1.1
command to enable debugging for
command to disable debugging
1035