Display Ospf Retrans-Queue - H3C MSR 20-20 Command Reference Manual

Examples

display ospf retrans-queue

Syntax
View
Parameters
Description
Examples
# Display OSPF request list information.
<Sysname> display ospf request-queue
OSPF Process 1 with Router ID 1.1.1.1
OSPF Request List
The Router's Neighbor is Router ID 2.2.2.2
Interface 10.1.1.1
Request list:
Type LinkState ID
Router 2.2.2.2
Network 192.168.0.1
Sum-Net 192.168.1.0
Table 274 Description on the fields of the display ospf request queue command
Field
The Router's Neighbor is Router ID
Address
Interface
Area
Request list
Type
LinkState ID
AdvRouter
Sequence
Age
display ospf [ process-id ] retrans-queue [ interface-type interface-number ]
[ neighbor-id ]
Any view
process-id: OSPF process ID, in the range 1 to 65535.
interface-type interface-number: Specifies an interface.
neighbor-id: Neighbor's router ID.
Use the
display ospf retrans-queue
information.
If no OSPF process is specified, retransmit list information of all OSPF processes is
displayed.
# Display OSPF retransmit list information.
<Sysname> display ospf retrans-queue
OSPF Process 1 with Router ID 1.1.1.1
OSPF Retransmit List
Area 0.0.0.0
AdvRouter
1.1.1.1
1.1.1.1
1.1.1.1
Description
Neighbor router ID
Neighbor interface IP address
Local interface IP address
Area ID
Request list information
LSA type
Link state ID
Router ID of the advertising router
LSA sequence number
LSA age time
command to display retransmit list
1127
Address 10.1.1.2
Sequence Age
80000004 1
80000003 1
80000002 2