Hello-Option Dr-Priority (Pim View); Hello-Option Holdtime (Pim View) - H3C MSR 20-20 Command Reference Manual

hello-option dr-priority (PIM view)

Syntax
View
Parameter
Description
Related command:
Example

hello-option holdtime (PIM view)

Syntax
View
Parameter
Description
Table 344 Description on the fields of the display pim rp-info command
Field
RP mapping for this group is:
2.2.2.2
hello-option dr-priority priority
undo hello-option dr-priority
Public instance PIM view, VPN instance PIM view
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger
value of this argument means a higher priority.
Use the
hello-option dr-priority
router priority for DR election.
Use the
undo hello-option dr-priority
By default, the router priority for DR election is 1.
pim hello-option dr-priority.
# Set the router priority for DR election to 3 in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option dr-priority 3
hello-option holdtime interval
undo hello-option holdtime
Public instance PIM view, VPN instance PIM view
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to
65,535.
Use the
hello-option holdtime
timeout time.
Use the undo hello-option holdtime
By default, the PIM neighbor timeout time is 105 seconds.
Description
The IP address of the RP serving the current multicast group
is 2.2.2.2
command to configure the global value of the
command to restore the default setting.
command to configure the PIM neighbor
command to restore the default setting.
1405