H3C MSR 20-20 Command Reference Manual page 1535

Parameter
Description
Related command:
Example
interface-type interface-number: Specifies an interface by its type and number.
all: Displays MPLS statistics for all interfaces.
Use the
display mpls statistics interface
for a specified or all interfaces.
To display statistics, set the statistics interval first. By default, the interval is 0 and
the system does not collect MPLS statistics, in which case the value of every
statistical item is 0.
statistics interval.
# Display MPLS statistics for all interfaces.
<Sysname> display mpls statistics interface all
Statistics for Interface IN :
Incoming Interface Ethernet1/0
Octets
Packets
Errors
Disables
Failed Label Lookup
Start Time
End Time
Statistics for Interface OUT :
Outgoing Interface Ethernet1/0
Octets
Packets
Errors
Disables
Start Time
End Time
Statistics for Interface IN :
Incoming Interface Ethernet1/1
Octets
Packets
Errors
Disables
Failed Label Lookup
Start Time
End Time
Statistics for Interface OUT :
Outgoing Interface Ethernet1/1
Octets
Packets
Errors
Disables
Start Time
End Time
Statistics for Interface IN :
Incoming Interface Serial2/0
Octets
Packets
Errors
Disables
command to display MPLS statistics
: 0
: 0
: 0
: 0
: 0
: 2004/04/28 10:23:55
: 2004/04/28 10:23:55
: 0
: 0
: 0
: 0
: 2004/04/28 10:23:55
: 2004/04/28 10:23:55
: 0
: 0
: 0
: 0
: 0
: 2004/04/28 10:24:04
: 2004/04/28 10:24:04
: 0
: 0
: 0
: 0
: 2004/04/28 10:24:04
: 2004/04/28 10:24:04
: 0
: 0
: 0
: 0
1535