1730
C
99: VAM S
HAPTER
Related command:
Example
vam server vpn
Syntax
View
Parameter
Description
Example
C
C
ERVER
ONFIGURATION
OMMANDS
By default, listening IP address and UDP port number are not configured.
Note that the VAM server only accepts the connections of all VPN domains
through the configured UDP port.
vam server vpn
# Configure the listening IP address to 10.1.1.1 and UDP port number to 40000
for a VAM server.
<Sysname> system-view
[Sysname] vam server ip-address 10.1.1.1 port 40000
vam server vpn vpn-name
undo vam server vpn vpn-name
System view
vpn-name: VPN domain name. It is a case-insensitive string containing 1 to 15
characters, which can be A to Z, a to z, 0 to 9, hyphen sign, and dot sign.
Use the
vam server vpn
a VPN domain with the same name already exists, executing this command will
enter the VPN domain view.
Use the
undo vam server vpn
By default, there is no VPN domain.
# Create VPN domain 1 and enter its view.
<Sysname> system-view
[Sysname] vam server vpn 1
[Sysname-vam-server-vpn-1]
command to create a VPN domain and enter its view. If
command to remove a specified VPN domain.