Display Route-Policy; If-Match As-Path - H3C MSR 20-20 Command Reference Manual

display route-policy

Syntax
View
Parameters
Description
Related commands:
Examples

if-match as-path

Syntax
View
Parameters
Description
display route-policy [ route-policy-name ]
Any view
route-policy-name: Routing policy name, a string of 1 to 19 characters.
Use the display route-policy
All routing policy information will be displayed if no route-policy-name is specified.
route-policy.
# Display the information of routing policy 1.
<Sysname> display route-policy policy1
Route-policy : policy1
permit : 10
if-match ip-prefix abc
apply cost 120
Table 284 Description on the fields of the display route-policy command.
Field
Route-policy
Permit
if-match ip-prefix abc
apply cost 120
if-match as-path as-path-number&<1-16>
undo if-match as-path [ as-path-number&<1-16> ]
Routing policy view
as-path-number: AS path ACL number, in the range of 1 to 256.
&<1-16>: Indicates the argument before it can be entered up to 16 times.
Use the
if-match as-path
against the AS path attribute of BGP routing information.
Use the
undo if-match as-path
The match criterion is not configured by default.
command to display routing policy information.
Description
Routing policy name
permit mode: permit, deny
Match criterion
If the match criterion is satisfied, set the route cost to 120.
command to specify AS path ACL(s) for matching
command to remove the match criterion.
1197