Display Ospfv3 Lsdb - H3C MSR 20-20 Command Reference Manual

1284 C 84: IP 6 OSPF
HAPTER V

display ospfv3 lsdb

Syntax
View
Parameters
Description
Examples
3 C C
V ONFIGURATION OMMANDS
Table 299 Description on the fields of the display ospfv3 interface command
Field
Timer interval configured, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Hello due in 00:00:02
Neighbor Count
Adjacent neighbor count
display ospfv3 [ process-id ] lsdb [ [ external | inter-prefix | inter-router |
intra-prefix | link | network | router ] [ link-state-id ] [ originate-router router-id ] |
total ]
Any view
process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
external: Specifies to display information about AS-external LSAs.
inter-prefix: Specifies to display information about Inter-area-prefix LSAs.
inter-router: Specifies to display information about Inter-area-router LSAs.
intra-prefix: Specifies to display information about Intra-area-prefix LSAs.
link: Specifies to display information about Link-LSAs.
network: Specifies to display information about Network-LSAs.
router: Specifies to display information about Router-LSAs.
link-state-id: Link state ID, an IPv4 address.
originate-router router-id: The ID of the advertising router.
total: Specifies to display all information in the LSDB.
Use the
display ospfv3 lsdb
# Display OSPFv3 LSDB information.
<Sysname> display ospfv3 lsdb
OSPFv3 Router with ID (5.5.5.5) (Process 1)
Link-LSA (Interface Ethernet1/0)
----------------------------------------------------------------
Link State ID Origin Router
0.15.0.9 5.5.5.5
0.15.0.9 6.6.6.6
Router-LSA (Area 0.0.0.0)
Description
Time intervals in seconds configured on the
interface, Hello: 10, Dead: 40, Wait: 40,
Retransmit: 5
Hello packet will be sent in 2 seconds
Number of Neighbors on the interface
Number of Adjacencies on the interface
command to display OSPFv3 LSDB information.
Age SeqNum CkSum
0304 0x80000001 0x5b6a
0311 0x80000001 0x6956
Prefix
1
1