Display Ripng Route - H3C MSR 20-20 Command Reference Manual

display ripng route

Syntax
View
Parameters
Description
Examples
display ripng process-id route
Any view
process-id: RIPng process number, in the range of 1 to 65535.
Use the display ripng route
associated to each route of a RIPng process.
# Display the routing information of RIPng process 100.
<Sysname> display ripng 100 route
Route Flags: A - Aging, S - Suppressed, G - Garbage-collect
----------------------------------------------------------------
Peer FE80::200:5EFF:FE04:B602
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost
Dest 3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost
Peer FE80::200:5EFF:FE04:B601 on Ethernet1/1
Dest 3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost
Dest 3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost
Peer FE80::200:5EFF:FE04:3302
Dest 100::/32,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:3::/64,
via FE80::200:5EFF:FE04:3302, cost
Dest 4000:4::/64,
Table 319 Description on the fields of the display ripng route command
Field
Peer
Dest
via
cost
tag
Sec
A"
S"
G"
command to display all RIPng routes and timers
on Ethernet1/0
on Ethernet1/2
Description
Neighbor connected to the interface
IPv6 destination address
Next hop IPv6 address
Routing metric value
Route tag
Time that a route entry stays in a particular state
The route is in the aging state
The route is in the suppressed state
The route is in the Garbage-collect state
2, tag 0, A, 34 Sec
2, tag 0, A, 34 Sec
2, tag 0, A, 13 Sec
2, tag 0, A, 13 Sec
2, tag 0, A, 6 Sec
2, tag 0, A, 6 Sec
2, tag 0, A, 6 Sec
2, tag 0, A, 6 Sec
1313