Related command:
Example
pim ipv6 holdtime join-prune
Syntax
View
Parameter
Description
Related command:
Example
pim ipv6 require-genid
Syntax
View
Use the
undo pim ipv6 holdtime assert
setting.
By default, the assert timeout time is 180 seconds.
holdtime join-prune (IPv6 PIM view), pim ipv6 holdtime join-prune, and
holdtime assert (IPv6 PIM view).
# Set the assert timeout time to 100 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 holdtime assert 100
pim ipv6 holdtime join-prune interval
undo pim ipv6 holdtime join-prune
Interface view
interval: Join/prune timeout time in seconds, with an effective range of 1 to
65,535.
Use the
pim ipv6 holdtime join-prune
timeout time on the interface.
Use the
undo pim ipv6 holdtime join-prune
setting.
By default, the join/prune timeout time is 210 seconds.
holdtime assert (IPv6 PIM view), pim ipv6 holdtime assert, and holdtime
join-prune (IPv6 PIM view).
# Set the join/prune timeout time to 280 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 holdtime join-prune 280
pim ipv6 require-genid
undo pim ipv6 require-genid
Interface view
command to restore the default
command to configure the join/prune
command to restore the default
1489