Rta Template; Rta Terminal - H3C MSR 20-20 Command Reference Manual

916 C 70: T
HAPTER ERMINAL
Example

rta template

Syntax
View
Parameters
Description
Example

rta terminal

Syntax
View
Parameters
A C
CCESS ONFIGURATION
By default, no source IP address is configured globally for TCP connections.
n
You can use this command to configure an IP address other than the outbound
■
interface's IP address of the initiating router as the TCP connection source IP
address. Generally, the loopback interface or dialer interface of the router are
used as the TCP connection source IP address for dial-up backup and address
hiding.
If a source IP address is also configured in a terminal template, this address is
■
preferred as the source IP address for the corresponding terminal to establish
TCP connections.
After the global TCP connection source IP address is configured, a TCP
■
connection must be reestablished for this address to take effect.
# Set the global TCP connection source IP address to 1.1.1.1.
<Sysname> system-view
[Sysname] rta source-ip 1.1.1.1
rta template template-name
undo rta template template-name
System view
template-name: Terminal template name, a string of 1 to 15 characters.
Use the
rta template
template view. If you specify an existing terminal template, you will enter the
corresponding terminal template view.
Use the undo rta template
# Create terminal template abc and enter terminal template view.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc]
rta terminal template-name terminal-number
undo rta terminal
Interface view
template-name: Terminal template name, a string of 1 to 15 characters.
C
OMMANDS
command to create a terminal template and enter terminal
command to delete a terminal template.