Uni Multicast-Control Multicast-Address - H3C S7500E Series Command Reference Manual

undo uni-number multicast vlan { { vlan-id } & <1-50> | all }
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
vlan-id: Multicast VLAN ID, in the range 1 to 4094. &<1-50> means that you can provide up to 50
VLAN IDs for this argument.
all: Specifies all the multicast VLAN IDs.
Description
Use the uni multicast vlan command to add a UNI to the specified multicast VLAN(s).
Use the undo uni multicast vlan command to remove a UNI from the specified multicast VLAN(s).
This command takes effect only when the ONU works in the IGMP snooping mode.
Related commands: multicast-mode.
Examples
# Add UNI 1 to multicast VLAN 200 and multicast VLAN 3000.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 multicast vlan 2000 3000

uni multicast-control multicast-address

Syntax
uni uni-number multicast-control multicast-address { multicast-address [ to multicast-address ] }
&<1-10> [ source-ip ip-address [ to ip-address ] ] rule { deny | permit [ channel-limit
channel-number ] | preview time-slice
preview-times preview-times [ reset-interval reset-interval-time ] ]* }
undo uni uni-number
multicast-address ] ] &<1-10>
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
multicast-address: Multicast IP addresses corresponding to the specified multicast channels. &<1-10>
indicates that you can specify up to 10 multicast IP addresses or multicast IP address ranges.
source-ip ip-address [ to ip-address ]: Specifies the IP address range of the multicast sources that
issue multicast channels. ip-address indicates the IP address of a multicast source.
preview-time [ preview-interval interval-time |
multicast-control multicast-address
3-31
[ multicast-address [ to