Filter-Policy Export (Rip View) - H3C MSR 20-20 Command Reference Manual

filter-policy export (RIP view)

Syntax
View
Parameters
Table 281 Description on the fields of the display rip route command
Field
Route Flags
Peer 21.0.0.23 on Ethernet1/0
Destination/Mask
Nexthop
Cost
Tag
Flags
Sec
# Display the routing statistics of RIP process 1.
<Sysname> display rip 1 route statistics
Peer Aging
21.0.0.23 2
21.0.0.12 2
Total 4
Table 282 Description on the fields of the display rip route statistics command
Field
Peer
Aging
Permanent
Garbage
Total
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol
[ process-id ] ] [ interface-type interface-number ]
undo filter-policy export [ protocol [ process-id ] ] [ interface-type interface-number ]
RIP view
acl-number: Number of the Access Control List (ACL) used for filtering outbound
routes, in the range of 2000 to 3999.
Description
R - RIP route
T - TRIP route
P - The route never expires
A - The route is aging
S - The route is suppressed
G - The route is in Garbage-collect state
Routing information learned on a RIP interface from
the specified neighbor
Destination IP address and subnet mask
Next hop of the route
Cost of the route
Route tag
Indicates the route state
Remaining time of the timer corresponding to the
route state
Permanent Garbage
0
0
0
Description
IP address of a neighbor
Total number of aging routes learned from the specified neighbor
Total number of permanent routes learned from the specified
neighbor
Total number of routes in the garbage-collection state learned from
the specified neighbor
Total number of routes learned from all RIP neighbors
3
4
7
1167