Display Mpls Ldp Isp - H3C MSR 20-20 Command Reference Manual

display mpls ldp Isp

Syntax
View
Parameter
Description
Table 372 Description on the fields of the display mpls ldp interface command
Field
Interface Name
LDP ID
Transport Address
Entity Status
Interface MTU
Label Advertisement Mode
Configured Keepalive Timer
Configured Hello Timer
Negotiated Hello Timer
Hello Message Sent/Rcvd [X/Y]
display mpls ldp lsp [ vpn-instance vpn-instance-name [ destination-address
mask-length ] ] [ | { begin | exclude | include } regular-expression ]
display mpls ldp lsp all [ | { begin | exclude | include } regular-expression ]
display mpls ldp lsp [ dest-addr mask-length ] [ | { begin | exclude | include }
regular-expression ]
Any view
all: Displays information about all LSPs established by LDP.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
dest-addr: Destination address of the LSP.
mask-length: Length of the mask for the destination address, in the range 0 to 32.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Use the
display mpls ldp lsp
established by LDP.
Description
Name of an LDP-enabled interface
LDP identifier
Transport address of the entity, also used for TCP
connection
Status of the entity, active or inactive
MTU of the interface
Label advertisement mode, DoD or DU
Value of the configured Keepalive timer
Value of the configured Hello timer
Value of the negotiated Hello timer
X: Number of Hello messages sent from the interface
Y: Number of Hello messages received by the interface
command to display information about LSPs
1521