Snmp-Agent Trap Enable Mpls; Static-Lsp Egress - H3C MSR 20-20 Command Reference Manual

Parameter
Description
Related command:
Example

snmp-agent trap enable mpls

Syntax
View
Parameter
Description
Example

static-lsp egress

Syntax
View
Parameter
index: Index number of the LSP, in the range 0 to 4,294,967,295.
all: Specifies all LSPs.
lsp-name: Name of the LSP, a string of 1 to 15 characters.
Use the
reset mpls statistics lsp
specified or all LSPs.
display mpls statistics lsp.
# Clear MPLS statistics for LSP lsp1.
<Sysname> reset mpls statistics lsp lsp1
snmp-agent trap enable mpls
undo snmp-agent trap enable mpls
System view
None
Use the snmp-agent trap enable mpls
function.
Use the
undo snmp-agent trap enable
By default, the function is disabled.
# Enable the MPLS trap function.
<Sysname> system-view
[Sysname] snmp-agent trap enable mpls
static-lsp egress lsp-name incoming-interface interface-type interface-number
in-label in-label
undo static-lsp egress lsp-name
System view
lsp-name: Name for the LSP, a string of 1 to 15 characters.
interface-type interface-number: Specifies an interface by its type and number.
command to clear MPLS statistics for a
command to enable the MPLS trap
command to disable the function.
1559