Display Load-Sharing Ip Address; Display Ipv6 Routing-Table - H3C MSR 20-20 Command Reference Manual

942 C 71: IP R
HAPTER OUTING
Examples

display load-sharing ip address

Syntax
View
Parameters
Description
Examples

display ipv6 routing-table

Syntax
T C
ABLE OMMANDS
# Display recursive tunnel information.
<Sysname> display ip relay-tunnel
Total Number of Relay-tunnel is: 1.
Dest/Mask: 40.40.40.40/255.255.255.255
Related instance id(s): 1(1) 2(1) 3(1) 4(1)
Table 207 Description on the fields of the display ip relay-tunnel command
Field
Total Number of Relay-tunnel
Dest/Mask
Related instance id(s)
display load-sharing ip address ip-address { mask | mask-length }
Any view
ip-address: Destination IP address, in dotted decimal notation.
mask: IP address mask, in dotted decimal notation.
mask-length:IP address mask length, in the range 0 to 32.
Use the
display load-sharing ip address
interface bandwidth-based non-balanced load sharing.
# Display the statistics about bandwidth-based load sharing.
<Sysname> display load-sharing ip address 10.2.1.0 24
There are/is totally 3 route entry(s) to the same destination network.
Nexthop Packet(s)
10.1.1.2 763851
10.1.2.2 1193501
10.1.3.2 15914
Table 208 Description on the fields of the display load-sharing ip address command
Field
Nexthop
Packet
Bandwidth
Flow
Interface
display ipv6 routing-table
Description
Total number of recursive tunnels
Destination address/mask of the recursive tunnel
The number in the parentheses after each instance ID
indicates the number of routes that have used the
recursive tunnel in the routing table corresponding to the
instance ID.
command to display statistics about
Bandwidth[KB] Flow(s)
100000
155000
2048
Description
Nexthop address
Total number of packets forwarded through the outbound interface
Bandwidth of the outbound interface used for load sharing
Number of flows fast forwarded through the outbound interface
Name of the outbound interface
Interface
0 Ethernet0/0/0
0 Atm1/0/0
0 Serial2/0/0