Display Mpls Ldp Interface - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

display mpls ldp interface

Syntax
View
Parameter
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Use the
display mpls ldp cr-lsp
established by LDP.
display mpls lsp.
# Display information about CR-LSPs established by LDP.
<Sysname> display mpls ldp cr-lsp
Displaying All LDP CR-LSP(s) for public network
----------------------------------------------------------------
CR-LSP ID DestAddress/Mask
----------------------------------------------------------------
1.1.1.9:0 2.2.2.9/32
2.2.2.9:0 1.1.1.9/32
----------------------------------------------------------------
The Total LDP CR-LSP(s): 2
Table 371 Description on the fields of the display mpls ldp cr-lsp command
Field
CR-LSP ID
DestAddress/Mask
In/OutLabel
In/Out-Interface
display mpls ldp interface [ all ] [ [ vpn-instance vpn-instance-name ]
[ interface-type interface-number ] ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
display mpls ldp interface [ all ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Any view
all: Displays all information.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
|: Filters the output information.
begin: Begins with the specified string.
command to display information about CR-LSPs
In/OutLabel
NULL/1027
1027/NULL
Description
ID of the CR-LSP
Destination address and the mask of the FEC
Incoming label/outgoing label
Incoming interface/outgoing interface
1519
In/Out-Interface
-------/S2/0
S2/0/-------