debugging bgp update l2vpn
Syntax
View
Default Level
Parameters
Description
MED
Origin
AS Path
Next Hop
22::22/128,
*Sep
4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:
BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :
Update message length : 78
Local Pref
MED
Origin
AS Path
Next Hop
100::/64,
// Update messages of IPv6 address family
debugging bgp update l2vpn [ peer { ipv4-address | group-name } ] [ receive | send ]
[ verbose ]
undo debugging bgp update l2vpn [ peer { ipv4-address | group-name } ] [ receive |
send ] [ verbose ]
User view
1: Monitor level
peer { ipv4-address | group-name }: Enables/disables BGP L2VPN Update message
debugging for the specified peer/peer group.
receive: Enables/disables the debugging for received BGP packets.
send: Enables/disables the debugging for sent BGP packets.
verbose: Displays detailed debugging information.
Use the
debugging bgp update l2vpn
L2VPN Update messages.
Use the
undo debugging bgp update l2vpn
for BGP L2VPN Update messages.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
: 0
: Incomplete
:
: 100::2
: 100
: 0
: Incomplete
:
: 100::2
command to enable debugging for BGP
command to disable debugging
1029