Display Ip Routing-Table Protocol - H3C MSR 20-20 Command Reference Manual

display ip routing-table protocol

Syntax
View
Parameters
Description
Examples
Protocol: Direct
Preference: 0
NextHop: 2.2.2.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 2.2.2.1/32
Protocol: Direct
Preference: 0
NextHop: 127.0.0.1
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active NoAdv
Tag: 0
For detailed description of the above output, see Table 204.
display ip routing-table protocol protocol [ inactive | verbose ]
Any view
protocol: Displays the routes of a routing protocol, not including routes
redistributed into the protocol. It can be bgp, direct, isis, ospf, rip, or static.
inactive: Displays only inactive routes. With this argument absent, the command
displays information about both active and inactive routes.
verbose: Displays detailed routing information. With this argument absent, the
command displays brief routing information.
Use the
display ip routing-table protocol
information of a specified routing protocol.
# Display brief information about direct routes.
<Sysname> display ip routing-table protocol direct
Public Routing Table : Direct
Summary Count : 6
Direct Routing table Status : < Active>
Summary Count : 6
Destination/Mask
2.2.2.0/24
2.2.2.2/32
127.0.0.0/8
127.0.0.1/32
192.168.80.0/24
192.168.80.10/32
command to display routing
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Process ID: 0
Cost: 0
Interface: Vlan2
Neighbour: 0.0.0.0
Label: NULL
Age: 00h20m52s
Process ID: 0
Cost: 0
Interface: InLoop0
Neighbour: 0.0.0.0
Label: NULL
Age: 00h20m52s
NextHop
2.2.2.1
127.0.0.1
127.0.0.1
127.0.0.1
192.168.80.10
127.0.0.1
939
Interface
Vlan2
InLoop0
InLoop0
InLoop0
Eth1/0
InLoop0