Display Vam Server Address-Map - H3C MSR 20-20 Command Reference Manual

1722 C 99: VAM S
HAPTER
View
Parameter
Description
Related command:
Example

display vam server address-map

Syntax
View
Parameter
Description
Example
C C
ERVER ONFIGURATION OMMANDS
VPN domain view
none: Specifies not to authenticate clients.
pap: Specifies to adopt PAP (password authentication protocol) authentication.
chap: Specifies to adopt CHAP (challenge authentication protocol) authentication.
domain name-string: Specifies the ISP domain for authentication by its name,
which is a case-insensitive string of 1 to 24 characters.
Use the
authentication-method
server to authenticate clients.
Use the undo authentication-method
By default, CHAP authentication is adopted and the ISP domain is the default
domain of the system that you configure.
vam server vpn, authentication-algorithm.
# Set the VAM server to authenticate clients using CHAP.
<Sysname> system-view
[Sysname] vam server vpn 1
[Sysname-vam-server-vpn-1] authentication-method chap
display vam server address-map { all | vpn vpn-name [ private-ip private-ip ] }
Any view
all: Displays address mapping information about all registered VAM clients on the
VAM server.
vpn vpn-name: Displays address mapping information about all registered VAM
clients in the VPN domain. The vpn-name argument indicates the VPN domain
name, a case-insensitive string of 1 to 15 characters.
private-ip private-ip: Displays address mapping information about the VAM client
with the specified private IP address. The private-ip argument indicates the private
IP address of the VAM client.
Use the
display vam server address-map
mapping information about the registered clients on the server.
# Display mapping information of the VAM clients in VPN domain 1.
<Sysname> display vam server address-map vpn 1
VPN name: 1
command to configure the mode for the VAM
command to restore the default.
command to display address