Graceful-Restart Timer Recovery - H3C MSR 20-20 Command Reference Manual

View
Parameter
Description
Example

graceful-restart timer recovery

Syntax
View
Parameter
Description
undo graceful-restart timer reconnect
MPLS LDP view
timer: Fault Tolerance (FT) reconnect time, in the range 60 to 300 seconds.
Use the
graceful-restart timer reconnect
time.
Use the
undo graceful-restart timer reconnect
default.
By default, the FT reconnect time is 300 seconds.
Note that:
The FT reconnect time refers to the maximum time that the stale state flag will
■
be preserved by the LSR after the TCP connection fails.
Modifying the FT reconnect time may cause all original sessions to be
■
reestablished. LSPs based on the sessions will be removed and need to be
reestablished.
# Set the FT reconnect time to 100 seconds.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-mpls-ldp] graceful-restart timer reconnect 100
graceful-restart timer recovery timer
undo graceful-restart timer recovery
MPLS LDP view
timer: LDP recovery time, in the range 3 to 300 seconds.
Use the
graceful-restart timer recovery
time.
Use the undo graceful-restart timer recovery
default.
By default, the LDP recovery time is 300 seconds.
Note that:
The LDP recovery time refers to the maximum time that the stale state label will
■
be kept by the LSR after a TCP reconnection.
command to set the FT reconnect
command to restore the
command to set the LDP recovery
command to restore the
1541