Qos Cq - H3C MSR 20-20 Command Reference Manual

1818 C 113: CQ C
HAPTER
Related commands:
Examples

qos cq

Syntax
View
Parameters
Description
Related commands:
Examples
C
ONFIGURATION OMMANDS
Default values will not be displayed.
qos cq, qos cql default-queue, qos cql inbound-interface, qos cql protocol,
qos cql queue, qos cql queue serving.
# Display information about a CQL.
<Sysname> display qos cql
Current CQL Configuration:
List Queue Params
2 3 Protocol ip fragments
3 0 Length 100
3 1 Inbound-interface Ethernet0
qos cq cql cql-index
undo qos cq
Interface view
cql-index: CQL index, in the range 1 to 16.
Use the command to apply the customized queue to an interface.
qos cq
Use the
undo qos cq
the interface to FIFO.
By default, the congestion management policy at the interfaces is FIFO.
Except for interfaces encapsulated with X.25, all physical interfaces can use CQ.
One interface can only use one group of customized queues.
This command can configure multiple classification rules for each group in the
CQL. During traffic classification, the system matches packets along the rule link. If
matching a certain rule, a packet will be classified into the corresponding priority
queue specified by this rule. If not matching any rule, it will go to the default
priority queue.
qos cql default-queue, qos cql inbound-interface, qos cql protocol, qos cql
queue serving, qos cql queue queue-length.
# Apply the CQ 5 on the Ethernet 1/0.
<Sysname> system-view
[Sysname] interface Ethernet1/0
[Sysname-Ethernet1/0] qos cq cql 5
command to restore the congestion management policy at