Default Cost (Ripng View); Checkzero - H3C MSR 20-20 Command Reference Manual

85

checkzero

Syntax
View
Parameters
Description
Examples

default cost (RIPng view)

Syntax
View
Parameters
Description
IP 6 RIP
V NG
C
OMMANDS
checkzero
undo checkzero
RIPng view
None
Use the command to enable the zero field check on RIPng packets.
checkzero
Use the
undo checkzero
The zero field check is enabled by default.
Some fields in RIPng packet headers must be zero. These fields are called zero
fields. You can enable the zero field check on RIPng packet headers. If any such
field contains a non-zero value, the RIPng packet will be discarded.
# Disable the zero field check on RIPng packet headers of RIPng 100.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] undo checkzero
default cost cost
undo default cost
RIPng view
cost: Default metric of redistributed routes, in the range of 0 to 16.
Use the default cost
routes.
Use the undo default cost
C
ONFIGURATION
command to disable the zero field check.
command to specify the default metric of redistributed
command to restore the default.