Peer Advertise-Ext-Community (Ipv6 Address Family View); Peer Allow-As-Loop (Ipv6 Address Family View) - H3C MSR 20-20 Command Reference Manual

Examples

peer advertise-ext-community (IPv6 address family view)

Syntax
View
Parameters
Description
Examples

peer allow-as-loop (IPv6 address family view)

Syntax
View
Parameters
Use the
undo peer advertise-community
configuration.
By default, no community attribute is advertised to any peer group/peer.
# Advertise the community attribute to the peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 advertise-community
peer { group-name | ipv4-address | ipv6-address } advertise-ext-community
undo peer { group-name | ipv4-address | ipv6-address } advertise-ext-community
IPv6 address family view
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
Use the
peer advertise-ext-community
community attribute to a peer/peer group.
Use the
undo peer advertise-ext-community
configuration.
By default, no extended community attribute is advertised to a peer/peer group.
# Advertise the extended community attribute to the peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 advertise-ext-community
peer { group-name | ipv4-address | ipv6-address } allow-as-loop [ number ]
undo peer { group-name | ipv4-address | ipv6-address } allow-as-loop
IPv6 address family view
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
command to remove the
command to advertise the extended
command to remove the
1243