Display Natpt All - H3C MSR 20-20 Command Reference Manual

display natpt all

Syntax
View
Parameter
Description
Example
Table 185 Description on fields of the display natpt aging-time command
Field
icmp -------aging-time value is 20
dns -------aging-time value is 10
syn -------aging-time value is 240
finrst -------aging-time value is 5
frag -------aging-time value is 5
display natpt all
Any view
None
Use the
display natpt all
information.
# Display all NAT-PT configuration information.
<Sysname> display natpt all
NATPT IPv4 Address Pool Information:
1: from 1.1.1.1
NATPT address mapping(v6bound view):
IPv4 Address
1.1.1.1
2.2.2.2
NATPT V6Server static mapping:
IPv4Address
1.1.1.1^ 6
NATPT V4bound information:
No Dynamic V4 Address Records Present
NATPT V6bound information:
No Dynamic V6 Address Records Present
NATPT Prefix Info:
Prefix
2001::
NATPT aging-time value information:
tcp -------aging-time value is
udp -------aging-time value is
icmp -------aging-time value is
dns -------aging-time value is
syn -------aging-time value is
Description
The timeout time for an ICMP packet is 20 seconds.
The timeout time for a DNS packet is 10 seconds.
The timeout time for a synchronization packet is 240
seconds.
The timeout time for a finrst packet is 5 seconds.
The timeout time for a fragmented packet is 5
seconds.
command to display all NAT-PT configuration
to 1.1.1.4
IPv6 Address
3001::0001
3001::0002
IPv6 Address
3001::0003^
86400 (seconds)
Type
SOURCE
DESTINATION
Pro
1270 TCP
Interface NextHop
40 (seconds)
20 (seconds)
10 (seconds)
240 (seconds)
865