H3C MSR 20-20 Command Reference Manual page 1090

1090 C 75: IS-IS D
HAPTER
Description
C
EBUGGING OMMANDS
general-error: Enables debugging for IS-IS errors.
graceful-restart: Enables debugging for IS-IS GR.
ha-events: Enables debugging for data hot backup. This keyword takes effect
only on a distributed device.
interface-information: Enables IS-IS interface debugging.
memory-allocating: Enables debugging for IS-IS memory allocation.
miscellaneous-errors: Enables debugging for errors unrelated to IS-IS.
receiving-packet-content: Enables debugging for received IS-IS packet contents.
self-originate-update: Enables debugging for IS-IS local updates.
sending-packet-content: Enables debugging for sent IS-IS packet contents.
snp-packet: Enables IS-IS SNP packet debugging.
spf-event: Enables debugging for IS-IS SPF route calculation.
spf-summary: Enables debugging for IS-IS route calculation summary.
spf-timer: Enables debugging for IS-IS route calculation triggers.
task-error: Enables debugging for IS-IS task errors.
timer: Enables IS-IS timer debugging.
traffic-eng: Enables debugging for IS-IS traffic switch fabricering.
advertisement: Enables debugging for IS-IS traffic switch fabricering
advertisement.
event: Enables debugging for IS-IS traffic switch fabricering events.
update-packet: Enables IS-IS update packet debugging.
process-id: IS-IS process ID, in the range of 1 to 65535.
vpn-instance-name: Specifies a VPN instance name, a string of 1 to 31 characters.
Support for this argument varies with device models.
Use the
debugging isis
the undo debugging isis command to disable specified debugging for IS-IS.
Table 243 Description on the fields of the debugging isis adjacency command
Field
Circuit State Up Success
Circuit State Down Success
command to enable specified debugging for IS-IS. Use
Description
Interface is up.
The interface is down (The adjacency
processing was complete).