Pim Bsr-Boundary; Pim Dm - H3C MSR 20-20 Command Reference Manual

Example

pim bsr-boundary

Syntax
View
Parameter
Description
Related command:
Example

pim dm

Syntax
# Enable IP multicast routing in the public instance and enter public instance PIM
view.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] pim
[Sysname-pim]
# Enable IP multicast routing in VPN instance mvpn and enter PIM view of VPN
instance mvpn.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] route-distinguisher 100:1
[Sysname-vpn-instance-mvpn] multicast routing-enable
[Sysname-vpn-instance-mvpn] quit
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn]
pim bsr-boundary
undo pim bsr-boundary
Interface view
None
Use the
pim bsr-boundary
boundary on the current interface.
Use the
undo pim bsr-boundary
admin-scope region boundary.
By default, no BSR admin-scope region boundary is configured.
c-bsr (PIM view), and multicast boundary on page 1337.
# Configure Ethernet 1/0 to be the boundary of the BSR admin-scope region.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim bsr-boundary
pim dm
undo pim dm
command to configure a BSR admin-scope region
command to remove the configured BSR
1411