Display Natpt Aging-Time - H3C MSR 20-20 Command Reference Manual

864 C 66: NAT-PT C
HAPTER

display natpt aging-time

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
<Sysname> display natpt address-mapping
NATPT address mapping(v6bound view):
IPv4 Address
1.1.1.1
2.2.2.2
NATPT V6Server static mapping:
IPv4Address
1.1.1.1^ 6
Table 184 Description on fields of the display natpt address-mapping command
Field
NATPT address mapping (v6bound
view)
Type
NATPT V6Server static mapping
IPv4Address
IPv6 Address
Pro
display natpt aging-time
Any view
None
Use the display natpt aging-time
NAT-PT connection.
# Display the timeout time for a NAT-PT session.
<Sysname> display natpt aging-time
NATPT aging-time value information:
tcp -------aging-time value is
udp -------aging-time value is
icmp -------aging-time value is
dns -------aging-time value is
syn -------aging-time value is
finrst -------aging-time value is
frag -------aging-time value is
Table 185 Description on fields of the display natpt aging-time command
Field
tcp -------aging-time value is 86400
udp -------aging-time value is 40
IPv6 Address
3001::0001
3001::0002
IPv6 Address
3001::0003^
Description
Displays the static and dynamic IPv6-to-IPv4 mapping.
Indicates whether the connection is initiated by an IPv6
host or an IPv4 host. If initiated by an IPv6 host, the IPv6
address is the source address. Otherwise, it is the
destination address. In the example, 3001::0001 is the
source address and 2.2.2.2 is the destination address.
Displays the NAT-PT address/port mapping.
IPv4 address and port number
IPv6 address and port number
Protocol type
command to display the timeout time for a
Description
The timeout time for a TCP packet is 86400 seconds.
The timeout time for a UDP packet is 40 seconds.
Type
SOURCE
DESTINATION
Pro
1270 TCP
86400 (seconds)
40 (seconds)
20 (seconds)
10 (seconds)
240 (seconds)
5 (seconds)
5 (seconds)