Opaque-Capability Enable - H3C MSR 20-20 Command Reference Manual

1142 C 76: OSPF C
HAPTER
View
Parameters
Description
Related commands:
Examples

opaque-capability enable

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
undo nssa
OSPF area view
default-route-advertise: Usable on an NSSA ABR or an ASBR only. If it is
configured on an NSSA ABR, the ABR generates a default route in a Type-7 LSA
into the NSSA regardless of whether the default route is available. If it is
configured on an ASBR, only a default route is available on the ASBR can it
generates the default route in a Type-7 LSA into the attached area.
no-import-route: Usable only on an NSSA ABR that is also the ASBR of the OSPF
routing domain to disable redistributing routes in Type7 LSAs into the NSSA area,
making sure that routes can be redistributed correctly.
no-summary: Usable only on an NSSA ABR to advertise only a default route in a
Type-3 summary LSA into the NSSA area. In this way, all the other summary LSAs
are not advertised into the area. Such an area is known as an NSSA totally stub
area.
Use the command to configure the current area as an NSSA area.
nssa
Use the undo nssa
By default, no NSSA area is configured.
All routers attached to an NSSA area must be configured with the nssa command
in area view.
default-cost (OSPF area view).
# Configure area1 as an NSSA area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] nssa
opaque-capability enable
undo opaque-capability
OSPF view
None
Use the
opaque-capability enable
advertisement and reception. With the command configured, the OSPF device can
receive and advertise the Type 9, Type 10 and Type 11 opaque LSAs.
command to restore the default.
command to enable Opaque LSA