Multicast Boundary - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Table 6-7 Description on the fields of the mtracert command
last-hop router
(6.6.6.6, 225.2.1.1)
-1 5.5.5.8
Incoming interface address
Previous-hop router address
Input packet count on
incoming interface
Output packet count on
outgoing interface
Total number of packets for
this source-group pair
Protocol
Forwarding TTL
Forwarding code

6.1.8 multicast boundary

Syntax
multicast boundary group-address { mask | mask-length }
undo multicast boundary { group-address { mask | mask-length } | all }
View
Interface view
Parameters
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Mask of the multicast group address.
mask-length: Mask length of the multicast group address, in the range of 4 to 32.
all: Specifies to remove all forwarding boundaries configured on the interface.
Field
Last-hop router
The (S, G) multicast stream for which the
forwarding path is being traced
The (S, G) outgoing interface address of each hop,
starting from the last-hop router
The address of the interface on which the (S, G)
packets arrive
The IP address of the router from which this router
receives packets from this source
The total number of multicast packets received on
the incoming interface
The total number of multicast packets transmitted
on the outgoing interface
The total number of packets from the specified
source forwarded by this router to the specified
group
The multicast routing protocol in use between this
router and the previous hop router
The minimum TTL that a packet is required to have
before it can be forwarded over the outgoing
interface
Forwarding code
6-12
Chapter 6 Multicast Routing and Forwarding
Configuration Commands
Description