Display Bgp Routing-Table Peer - H3C MSR 20-20 Command Reference Manual

display bgp routing-table peer

Syntax
View
Parameters
Description
Related commands:
Examples
Table 222 Description on the fields of the display bgp routing flap-info command
Field
From
Flaps
Duration
Reuse
Refer to Table 219 for description on the other fields above.
display bgp routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ]
Any view
ip-address: IP address of a peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: IP address of the destination network.
mask: Mask of the destination network, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
statistic: Displays route statistics.
Use the display bgp routing-table peer
information advertised to or received from the specified BGP peer.
display bgp peer.
# Display BGP routing information advertised to BGP peer 20.20.20.1.
<Sysname> display bgp routing-table peer 20.20.20.1 advertised-routes
Total Number of Routes: 2
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
h - history,
Origin : i - IGP, e - EGP, ? - incomplete
Network
*> 30.30.30.0/24
*> 40.40.40.0/24
Refer to Table 219 for description on the fields above.
Description
Source IP address of the route
Number of routing flaps
Duration time of the flap route
Reuse time of the flap route
command to display BGP routing
i - internal, s - suppressed, S - Stale
NextHop MED
0.0.0.0 0
0.0.0.0 0
LocPrf PrefVal Path/Ogn
0 i
0 i
975