Ipv6 Host; Ipv6 Icmp-Error - H3C MSR 20-20 Command Reference Manual

848 C 65: IP 6 B
HAPTER V
Parameter
Description
Example

ipv6 host

Syntax
View
Parameter
Description
Example

ipv6 icmp-error

Syntax
View
C C
ASICS ONFIGURATION OMMANDS
None
Use the ipv6 fib-loadbalance-type hash-based
sharing mode based on the HASH algorithm for packet forwarding.
Use the
undo ipv6 fib-loadbalance-type hash-based
the load sharing mode to the default.
By default, the load sharing based on polling is adopted, that is, each ECMP route
is used in turn to forward packets.
# Specify the load sharing mode based on the HASH algorithm for packet
forwarding.
<Sysname> system-view
[Sysname] ipv6 fib-loadbalance-type hash-based
ipv6 host hostname ipv6-address
undo ipv6 host hostname [ ipv6-address ]
System view
hostname: Host name, a string of up to 20 characters. The character string can
contain letters, numerals, "_", "-", or "." and must contain at least one letter.
ipv6-address: IPv6 address.
Use the
ipv6 host
and IPv6 addresses.
Use the
undo ipv6 host
names and IPv6 addresses.
Each host name can correspond to only one IPv6 address.
# Configure the mapping between a host name and an IPv6 address.
<Sysname> system-view
[Sysname] ipv6 host aaa 2001::1
ipv6 icmp-error { bucket bucket-size | ratelimit interval } *
undo ipv6 icmp-error
System view
command to configure the mappings between host names
command to remove the mappings between host
command to specify the load
command to restore