980
C
72: BGP C
HAPTER
Description
Examples
graceful-restart timer wait-for-rib
Syntax
View
Parameters
Description
Examples
group (BGP/BGP-VPN instance view)
Syntax
View
C
ONFIGURATION
OMMANDS
Use the
graceful-restart timer restart
time for a peer to reestablish a BGP session.
Use the
undo graceful-restart timer restart
By default, the maximum time for a peer to reestablish a BGP session is 150
seconds.
# Configure the maximum time for a peer to reestablish a BGP session as 300
seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] graceful-restart timer restart 300
graceful-restart timer wait-for-rib timer
undo graceful-restart timer wait-for-rib
BGP view
timer: Time to wait for the End-of-RIB marker, in the range 3 to 300 seconds.
Use the
graceful-restart timer wait-for-rib
wait for the End-of-RIB marker.
Use the
undo graceful-restart timer wait-for-rib
default.
By default, the time to wait for the End-of-RIB marker is 180 seconds.
n
After a BGP session has been successfully (re)established, the End-of-RIB
■
marker must be received within the time specified with this command.
Using this command can speed up route convergence.
■
# Set the time to wait for the End-of-RIB marker to 100 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] graceful-restart timer wait-for-rib 100
group group-name [ external | internal ]
undo group group-name
BGP view/BGP-VPN instance view
command to configure the maximum
command to restore the default.
command to configure the time to
command to restore the