Display Tcp Ipv6 Status - H3C MSR 20-20 Command Reference Manual

842 C 65: IP 6 B
HAPTER V

display tcp ipv6 status

Syntax
View
Parameter
Description
Example
C C
ASICS ONFIGURATION OMMANDS
Table 180 Description on fields of the display tcp ipv6 statistics command
Field
Sent packets:
Total: 0
urgent packets: 0
control packets: 0 (including 0 RST)
window probe packets: 0
window update packets: 0
data packets: 0 (0 bytes) data
packets retransmitted: 0 (0 bytes)
ACK only packets: 0 (0 delayed)
Retransmitted timeout
connections dropped in retransmitted timeout
Keepalive timeout
keepalive probe
Keepalive timeout, so connections disconnected
Initiated connections
accepted connections
established connections
Closed connections
dropped
initiated dropped
display tcp ipv6 status
Any view
None
Use the display tcp ipv6
# Display the TCP connection status.
<Sysname> display tcp ipv6 status
TCP6CB Local Address
045d8074 ::->21
Description
Statistics of sent packets, including
1 Total number of packets
2 Number of packets containing an
urgent indicator
3 Number of control packets
4 Number of window probe packets
5 Number of window update packets
6 Number of data packets
7 Number of retransmitted packets
8 Number of ACK packets
Number of packets whose retransmission
times out
Number of connections dropped because
of retransmission timeout
Number of keepalive timeouts
Number of keepalive probes
Number of connections dropped because
of keepalive response timeout
Number of initiated connections
Number of accepted connections
Number of established connections
Number of closed connections
Number of dropped connections (after
SYN is received from the peer)
Number of initiated but dropped
connections (before SYN is received from
the peer)
command to display the TCP connection status.
Foreign Address
::->0
State
Listening