Reset Bgp Ipv4 All; Router-Id - H3C MSR 20-20 Command Reference Manual

1010 C 72: BGP C
HAPTER
Description
Examples

reset bgp ipv4 all

Syntax
View
Parameters
Description
Examples

router-id

Syntax
View
Parameters
Description
C
ONFIGURATION OMMANDS
as-path-acl-number: Clears the flap statistics of routes matching an AS path ACL,
number of which is in the range 1 to 256.
ip-address: Clears the flap statistics of a route.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
Use the
reset bgp flap-info
matching the specified filter.
The flap statistics of all the routes will be cleared if no parameter is specified.
# Clear the flap statistics of all routes matching AS path ACL 10.
<Sysname> reset bgp flap-info as-path-acl 10
reset bgp ipv4 all
User view
None
Use the
reset bgp ipv4 all
unicast address family.
# Reset all the BGP connections of IPv4 unicast address family.
<Sysname> reset bgp ipv4 all
router-id router-id
undo router-id
BGP view
router-id: Router ID in IP address format.
Use the router-id
Use the
undo router-id
To run BGP protocol, a router must have a router ID, which is an unsigned 32-bit
integer, the unique ID of the router in the AS.
command to clear the flap statistics of routes
command to reset all the BGP connections of IPv4
command to specify a router ID.
command to remove a router ID.