Qos Cql Protocol - H3C MSR 20-20 Command Reference Manual

1820 C 113: CQ C
HAPTER
Related commands:
Examples

qos cql protocol

Syntax
View
Parameters
C
ONFIGURATION OMMANDS
Use the undo qos cql inbound-interface
classification rules.
By default, no classification rules are configured.
This command matches a packet to a rule according to the interface that the
packet comes from. For the same cql-index, this command can be repeatedly
used, establishing different classification rules for packets from different
interfaces.
qos cql default-queue, qos cql protocol, qos cql queue serving, qos cql
queue queue-length
# Specify a rule to put packets from the interface Ethernet 5/0 in queue 3.
<Sysname> system-view
[Sysname] qos cql 5 inbound-interface ethernet 5/0 queue 3
qos cql cql-index protocol ip queue-key key-value queue queue-number
undo qos cql cql-index protocol ip [ queue-key key-value ]
System view
cql-index: CQL index, in the range 1 to 16.
queue-number: Queue number, in the range 0 to 16.
ip: Protocol name is IP.
queue-key: Associated key of a queue.
key-value: Matching rule of a queue associated key.
When protocol-name is IP, the values of queue-key and key-value are displayed in
the following table:
Table 484 Descriptions of values of queue-key and key-value
queue-key key-value
acl access-list-number,
2000 to 3999
fragments Null
greater-than Length, 0 to 65535
less-than Length, 0 to 65535
tcp Port number, 0 to
65535
command to delete corresponding
Description
All IP packets that match the specified ACL are
enqueued.
All fragmented IP packets are enqueued.
Any link layer frame greater than the specified
value is enqueued.
Link layer frames greater than the specified value
are enqueued.
Any IP packet whose source or destination TCP port
number is the specified port number will be
classified.